Glow Energy SMF VRLA 12v/200ah

Product specifications

Bty. Model	Dimensions ( in mm) +/- 5 mm			Weight in kg. (+/-5%)
Bty. Model	Length	Width	Height	Weight in kg. (+/-5%)
GL 7	151	65	100	2.20
GL 12	151	98	100	3.75
GL 17	181	76	171	6.00
GL 26	166	125	175	9.00
GL 42	197	165	170	13.5
GL 65	330	168	176	21.0
GL 75	350	168	176	23.5
GL 85	410	175	225	26.5
GL 100	410	175	225	30.0
GL 120	410	175	225	33.0
GL 150	525	220	225	47.0
GL 200	535	225	242	60.5
GL 220	535	225	242	64.0

Applications

UPS: Systems Banking, Financial Services & Insurance IT / ITES
Telecom: Optical NetworkTerminal Telecom Equipment
Power Back up: CFL/LED Lamps Railway Emergency Lighting Solar Power Equipment Medical Instruments Fire & Security Alarm Systems

FEATURE BENEFIT SNAPSHOT

Cyclic grid alloy for positive plate

Higher cycle life

Radial grids

Low internal resistance
Quick recharge
High discharge performance

AGM Separator

Greater compression
Longer life

Copper alloy screw type terminals

Better electrical conductivity
Absolute positive contact
Zero wear & tear

Deep discharge capability

Withstands frequent & long power failures

Low self discharge

Longer shelf life

Product conformance

JIS C 8702-1

DESIGN AND CONSTRUCTION FEATURES

Container and cover sealing

Heat sealing / Special epoxy sealing for better joint strength.

Container

High impact PP/ABS container for better strength.

Separator

High porosity,Absorben Glass Mat separator (AGM)with low internal resistance.

Terminals

High conductivity brass terminals for better electrical conductivity.

Safety valve

releasing, pressure regulating EPDM valve.

Inter Cell Welding (ICW) or Over patrician joint

Withstands high rate performance .

Electrolyte

High purity sulphuric acid along with additives to maximize shelf life and to improve heat dissipation .

Positive plate

Flat pasted plate with corrosion resistant cyclic lead alloy .

Negative plate

Flat pasted plate with lead calcium alloy for maintenance free characteristics .

CHARGE SETTINGS AT 25°C

Dual setting

Boost 14.0V Float 13.7V

Single setting

I3.8V

Cyclic

14.1 V

Current limit (% of rated capacity)

Minimum 10%
Maximum 20%

Temperature compensation for charge voltage

Compensation of 18mV to be reduced for every 1°C rise in temperature and vice versa.

DESIGN FLOAT LIFE

The float life of the battery is defined in calendar years at a standard temperature of 25°C, when floated with a charge voltage of 2.25 volts per cell.The expected float life of batteries at various average ambient temperatures, when floated with a voltage of 2.25 volts per cell is shown in graph.

DISCHARGE CHARACTERISTICS

The curves in the figure illustrate the typical discharge characteristics at an ambient temperature of 25°C. The C20 expresses the nominal capacity of the battery at 20 hr discharge rate.

CYCLE LIFE

Battery cycle life is highly dependent on the depth of discharge, recharge and ambient temperature that the battery experiences during each cycle. The number of cycles related to the depth of discharge with respect to % capacity is shown in graph.